Company

 
 

Welcome to ETD.

 

The SAE J826 H-POINT MANIKIN

As supplied to leading motor manufacturers

 
 
     
  We are the marketing partner from AutoAcc, who manufacture the SAE J826H-Point-Manikin which conforms to the following E/ECE/324, E/ECE/TRANS/505 standards.

The SAE Standard has been prepared to provide a universal three dimensional manikin for use in defining vehicle seating accommodation. This represents the weight and contour of a 10th, 50th & 95th percentile adult male.

Constructed of reinforced plastic and metal, it consists of a separate back pan and seat pan, mechanically hinged at the hip or "H" point, which simulates the actual pivot centre of the human torso and thigh.
  
 
 
Requirements for manikin´s
in the European legislation
The SAE J826B mannequin manufactured by AutoAcc conforms to the following standard, E/ECE/324, E/ECE/TRANS/505, regulation No. 14, REV. 1/ADD. 13/REF, 1, ANNEX 4, as required for use with the EEC Directives listed below.
EEC Directive EEC Regulation Title
76/115-82/318 14 Belt Anchorage
74/60-78/632 21 Interior Fitting
71/127-79/795 - Rear Visibility
77/649-81/643 - Forward Visibility
78/317 - Demist-Defrost
78/318 - Wiper Washer System
74/408-81/577 17 Seat Anchorage
78/932 25 Head Restraint

 

 
   
 

Our Address

 
     
  ETD
Owner: Robert Berwick
Vossn Weg 4,
Hittfeld,
D-21218 Seevetal
Germany
Fon +49 (0) 4105 2008 /9
Fax +49 (0) 4105 2000
ISDN +49 (0) 4105 635120
Mobile +49 (0) 173 928 4925
 
     
     
 
 
 
 
Company       H-Point-Manikin       Head Measuring Devices      Torso Measuring Devices       Seat Measuring Devices       3D-Video-Manikin      
Clients       PDF Documents       ATD Crash-Test-Dummies       Business to Business
Homepage       AGB       Imprint       E-Mail       Webmaster
ETD 1592005. All rights reserved. Alle Rechte vorbehalten.